ip pim keepalive-period
Configures the period during which the (S,G) Join state will be maintained in the absence of (S,G) Join
messages or explicit (S,G) local membership.
ip pim keepalive-period seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This timer is called the Keepalive Period in the PIM-SM specification and the Source Lifetime in the
PIM-DM specification.
•
This command includes support for both IPv4 PIM and IPv6 PIM.
Examples
-> ip pim keepalive-period 500
Release History
Release 6.3.1; command was introduced.
page 30-18
Specifies the timeout value, in seconds (0-65535).
default
210
OmniSwitch CLI Reference Guide
PIM Commands
June 2012