Ip Dvmrp Route-Holddown - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip dvmrp route-holddown

Configures the time during which DVMRP routes are kept in a hold down state. A holddown state refers to
the time that a route to an inactive network continues to be advertised.
ip dvmrp route-holddown seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> ip dvmrp route-holddown 120
Release History
Release 6.1; command was introduced.
Related Commands
ip dvmrp route-timeout
show ip dvmrp
show ip dvmrp route
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpRouteHoldDown
page 29-14
Specifies the holddown time, in seconds (1–86400).
default
120
Configures the route expiration timeout value.
Displays the global DVMRP parameters.
Displays the DVMRP routes that are being advertised to other
routers.
OmniSwitch CLI Reference Guide
DVMRP Commands
June 2012