Ip Pim Probe-Time - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip pim probe-time

Configures the amount of time before the Register Suppression timer expires, at which point the Desig-
nated Router (DR) sends a Null Register message to the Rendezvous Point (RP). This allows the RP to
refresh the Register-Stop. If the Register Suppression timer expires, the DR will resume encapsulating
packets from the source to the RP.
ip pim probe-time seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command is used with both IPv4 and IPv6 PIM-SM.
•
This command is supported only in the sparse mode.
Examples
-> ip pim probe-time 5
Release History
Release 6.1.1; command was introduced.
Related Commands
show ip pim sparse
show ipv6 pim sparse
MIB Objects
alaPimsmGlobalConfig
alaPimsmProbeTime
page 30-22
The probe time, in seconds (1–300).
default
5
Displays the status of the various global parameters for the PIM
sparse mode.
Displays the status of the various global parameters for the IPv6
PIM sparse mode.
OmniSwitch CLI Reference Guide
PIM Commands
June 2012