Show Ipv6 Pim Bsr - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ipv6 pim bsr

Displays information about the elected BSR for PIM IPv6. If the scope argument is included in the
command line, then this command will display BSR information of the specified scope zone. If the scope
argument is not included in the command line then BSR information for all the known scope zones will be
displayed.
show ipv6 pim bsr [scope scope_value]
Syntax Definitions
scope_value
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> show ipv6 pim bsr
BSR Global Scope
BSR Address
BSR Priority
Hash Mask Length
Expiry Time
BSR Scope Zone:6
BSR Address
BSR Priority
Hash Mask Length
Expiry Time
->show ipv6 pim bsr scope 6
BSR Scope Zone:3
BSR Address
BSR Priority
Hash Mask Length
Expiry Time
page 30-116
This is an optional argument used to display BSR information of a
particular scope zone.
= 8000::7,
= 192,
= 126,
= 00h:01m:35s
= 3000::7,
= 192,
= 126,
= 00h:01m:32s
= 3000::7,
= 192,
= 126,
= 00h:01m:32s
OmniSwitch CLI Reference Guide
PIM Commands
June 2012