Show Ipv6 Multicast Neighbor - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IP Multicast Switching Commands

show ipv6 multicast neighbor

Displays the MLD neighbor table entries of IPv6 Multicast Switching and Routing.
show ipv6 multicast neighbor
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ipv6 multicast neighbor
Total 2 Neighbors
Host Address
-------------------------+-----+-----+-------+------+-----
fe80::2a0:ccff:fed3:2853
::
output definitions
Host Address
VLAN
Port
Static
Count
Life
Release History
Release 6.6.1; command was introduced.
Related Commands
ipv6 multicast static-neighbor
OmniSwitch 6250 CLI Reference Guide
VLAN Port Static
1 2/1 no
1 2/13 yes
The IPv6 address of the IPv6 multicast neighbor.
The VLAN associated with the IPv6 multicast neighbor.
The slot and port number of the IPv6 multicast neighbor.
Whether it is a static MLD neighbor or not.
Displays the count of the IPv6 multicast neighbor.
The life time of the IPv6 multicast neighbor.
Creates a static MLD neighbor entry on a specified port on a specified
VLAN.
November 2009
Count Life
1 6
0 0
page 41-93