BGP Commands
output definitions (continued)
Path Cluster List
Path unknown attribute
Release History
Release 6.1.5; command was introduced.
Related Commands
show ipv6 bgp routes
OmniSwitch CLI Reference Guide
Sequence of Cluster Id values representing the reflection path that the
route has passed, if this is a reflected route in the local AS.
Indicates BGP attributes found in UPDATE messages which the router
does not support. For example, multi-protocol attributes are not sup-
ported by the router in this release, but it is possible for these attributes
to appear in a BGP route.
Displays the known IPv6 BGP routes.
June 2012
page 25-201