Show Ipv6 Bgp Neighbors Statistics - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ipv6 bgp neighbors statistics

Displays the neighbor statistics of the configured IPv6 BGP peers.
show ipv6 bgp neighbors statistics [ipv6_address]
Syntax Definitions
ipv6_address
Defaults
By default, the neighbor statistics for all the IPv6 BGP peers will be displayed.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
Use the ipv6_address parameter to display the neighbor statistics of a specified IPv6 BGP peer.
Examples
-> show ipv6 bgp neighbors statistics
Legends: Nbr = Neighbor
As = Autonomous System
RMSGS = # of received messages
SMSGS = # of sent messages
RUPDS = # of Update messages received
SUPDS = # of Update messages sent
RNOFY = # of Notify messages received
SNOFY = # of Notify messages sent
RPFXS = # of prefixes received
UPTNS = # of UP transitions
DNTNS = # of DOWN transitions
Nbr address
-----------------------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----
2001:100:3:4::1
output definitions
Nbr address
As
RMSGS
SMSGS
page 25-240
The 128-bit IPv6 address.
As RMSGS SMSGS RUPDS SUPDS RNOFY SNOFY RPFXS UPTNS DNTNS
30 225 260 2
The IPv6 address for this peer. This value is configured using the
ipv6 bgp neighbor
The autonomous system to which this peer belongs. This value is con-
figured using the ipv6 bgp neighbor remote-as
Total number of messages (UPDATE, NOTIFY, OPEN, KEEPALIVE)
received by this peer.
Total number of messages (UPDATE, NOTIFY, OPEN, KEEPALIVE)
sent by this peer.
3 0 0
command.
OmniSwitch CLI Reference Guide
BGP Commands
10 1 1
command.
June 2012