Ip Bgp Policy Route-Map Community-Mode - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp policy route-map community-mode

Configures the action to be taken for a community string when a match is found.
ip bgp policy route-map name sequence_number community-mode {add | replace}
Syntax Definitions
name
sequence_number
add
replace
Defaults
parameter
add | replace
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
This command is used in conjunction with
next line shows the combined usage.
Examples
-> ip bgp policy route-map routemap1 1 community-mode replace
-> ip bgp policy route-map routemap1 1 community 400:1 500:1 community-mode replace
Release History
Release 6.1; command was introduced.
OmniSwitch CLI Reference Guide
The route map name.
The route map sequence number. The valid range is 1–255.
Adds the community string specified in the command
route-map community.
Replaces the community string specified in the command
route-map community.
default
add
ip bgp policy route-map
June 2012
ip bgp policy
ip bgp policy
community. The example on the
page 25-129