IS-IS Commands
ip isis psnp-auth
Enables or disables the authentication of Partial Sequence Number PDUs (PSNPs).
ip isis psnp-auth
no ip isis psnp-auth
Syntax Definitions
N/A
Defaults
PSNP authentication check is enabled by default.
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
Use the no form of this command to prevent the authentication of PSNP packets.
Examples
-> ip isis psnp-auth
-> no ip isis psnp-auth
Release History
Release 6.2.1; command was introduced.
Related Commands
ip isis level psnp-auth
show ip isis status
MIB Objects
vRtrIsisTable
vRtrIsisPsnpAuthentication
OmniSwitch CLI Reference Guide
Configures the PSNP authentication for specific IS-IS levels.
Displays the IS-IS status.
June 2012
page 24-13