Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1939

IP Multicast VLAN Commands
The following commands configure the receiver port in the VLAN Stacking mode:
-> ethernet-service ipmvlan 1002
-> vlan ipmvlan 1002 receiver-port port 1/1
Note that in the above example, port 1/1 was previously configured as a VLAN Stacking user port. See the
"VLAN Stacking Commands" chapter for more information.
The following command removes the port configured as a sender port:
-> no vlan ipmvlan 1002 receiver-port port 1/1
Release History
Release 6.2.1; command was introduced.
Related Commands
show vlan ipmvlan port-config
MIB Objects
alaipmvVlanPortTable
alaipmvVlanPortIPMVlanNumber
alaipmvVlanPortPortNumber
alaipmvVlanPortPortType
alaipmvVlanPortRowStatus
OmniSwitch CLI Reference Guide
Displays the sender and receiver ports for a specific IP Multicast VLAN
or all the configured IP Multicast VLANs.
June 2012 page 28-11