Show Ip Slb - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip slb

Displays the status of Server Load Balancing on a switch.
show ip slb
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> show ip slb
Admin status
Operational status
Number of clusters
Output fields are described here:
output definitions
Admin status
Operational status
Number of clusters
Release History
Release 6.1; command was introduced.
page 26-32
: Enabled,
: In Service,
: 3
The current administrative status of Server Load Balancing (SLB) on
this switch (Enabled or Disabled).
The current operational status of Server Load Balancing (SLB) on this
switch, which is either In service (at least one SLB cluster is in service)
or Out of service (all SLB clusters are out of service).
The total number of Server Load Balancing (SLB) clusters on this
switch. A maximum of 16 SLB clusters per switch is allowed.
Server Load Balancing Commands
OmniSwitch CLI Reference Guide June 2012