Ip Dvmrp Prune-Lifetime - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

DVMRP Commands

ip dvmrp prune-lifetime

Indicates the length of time a prune will be in effect—i.e., its lifetime. When the prune lifetime expires, the
interface is joined back onto the multicast delivery tree. If unwanted multicast datagrams continue to
arrive, the prune mechanism will be re-initiated and the cycle will continue.
ip dvmrp prune-lifetime seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> ip dvmrp prune-lifetime 7200
Release History
Release 6.1; command was introduced.
Related Commands
ip dvmrp prune-timeout
show ip dvmrp prune
show ip dvmrp
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpPruneLifetime
OmniSwitch CLI Reference Guide
Specifies the prune lifetime, in seconds (180–86400).
default
7200
Configures the prune packet retransmission value.
Displays DVMRP prune entries, including the router's upstream
prune state.
Displays the global DVMRP parameters.
June 2012 page 29-11