Ip Slb Cluster Admin Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip slb cluster admin status

Administratively enables or disables a Server Load Balancing (SLB) cluster on a switch.
ip slb cluster cluster_name admin status {enable | disable}
Syntax Definitions
cluster_name
enable
disable
Defaults
By default, a cluster is administratively enabled when the cluster is created.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
The SLB cluster name specified with this command must already exist in the switch configuration.
Examples
-> ip slb cluster hr_servers admin status enable
-> ip slb cluster "mail servers" admin status disable
Release History
Release 6.1; command was introduced.
Related Commands
show ip slb clusters
show ip slb cluster
ip slb cluster
ip slb server ip cluster
MIB Objects
slbClusterTable
slbClusterAdminStatus
page 26-6
The name of an existing Server Load Balancing cluster.
Administratively enables a Server Load Balancing cluster on a switch.
Administratively disables a Server Load Balancing cluster on a switch.
Displays the status and configuration of all Server Load Balancing clus-
ters on a switch.
Displays detailed status and configuration information for a single
Server Load Balancing cluster on a switch.
Configures Server Load Balancing clusters.
Adds, deletes, or modifies parameters of physical servers in logical
Server Load Balancing clusters.
Server Load Balancing Commands
OmniSwitch CLI Reference Guide June 2012