Show Ipv6 Bgp Path - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ipv6 bgp path

Displays the known IPv6 BGP paths for all the routes or a specific route.
show ipv6 bgp path [ipv6-addr ipv6_address/prefix_length]
Syntax Definitions
ipv6_address
/prefix_length
Defaults
By default, IPv6 BGP paths for all the routes will be displayed.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
Use the ipv6_address/prefix_length parameter to display the IPv6 BGP paths for a specified route.
Examples
-> show ipv6 bgp path
Legends: Sta
>
U
Nbr
(O)
degPref = degree of preference
Sta Prefix
---+-----------------------------+------------------------------------+---+-------
> 2020:100:200:1::/64
> 2020:100:200:2::/64
> 2020:100:200:3::/64
> 2020:100:200:4::/64
> 2020:100:200:5::/64
> 2525:2525:1::/48
> 2525:2525:2::/48
> 2525:2525:3::/48
> 2525:2525:4::/48
> 2525:2525:5::/48
page 25-198
The 128-bit IPv6 address.
The number of bits that are significant in the IPv6 address (mask)
(3..128).
= Path state
= best, F = feasible, S = stale
= un-synchronized
= Neighbor
= Path Origin (? = incomplete, i = igp, e = egp)
Nbr Address
2001:100:3:4::1
2001:100:3:4::1
2001:100:3:4::1
2001:100:3:4::1
2001:100:3:4::1
100.3.4.1
100.3.4.1
100.3.4.1
100.3.4.1
100.3.4.1
OmniSwitch CLI Reference Guide
BGP Commands
(O) degPref
i 100
i 100
i 100
i 100
i 100
i 100
i 100
i 100
i 100
i 100
June 2012