Show Qos Slice - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Alcatel-lucent omniswitch 6850-48: reference guide

Hide thumbs Also See for OmniSwitch 6850-48:

Table of Contents

QoS Commands

show qos slice

Displays rule availability and usage information for QoS slices of QoS slots. A slice is a logical section of

hardware and corresponds to particular ports on the interface.

show qos slice {ingress | egress} [slot/slice]

Syntax Definitions

By default, information is displayed for all slots/slices.

Platforms Supported

OmniSwitch 6400, 6850, 6850E, 6855, 9000E

OmniSwitch 6400, 6855-U24X, 9000E; egress parameter supported.

Usage Guidelines

Use the ingress parameter to display information for rules applied to ingress traffic.

Use the egress parameter to display information for rules applied to egress traffic.

Use the slot/slice parameter to display information for a specific slot or slice on the switch.

This command is useful for monitoring switch resources required for policy rules.

-> show qos slice

Type Total/Free

OmniSwitch CLI Reference Guide

Displays information for ingress rules.

Displays information for egress rules.

The slot number and slice for which you want to view information. The

number of slices per module varies depending on the type of module.

CAM Total/Free