Ipv6 Bgp Neighbor Remote-As - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ipv6 bgp neighbor remote-as

Assigns an AS number to the BGP peer.
ipv6 bgp neighbor ipv6_address [remote-as num]
Syntax Definitions
ipv6_address
num
Defaults
parameter
num
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
A BGP peer created with the
autonomous system number. If the AS number assigned to the peer matches the AS number of the local
BGP speaker (assigned using the
nal to the local autonomous system. Otherwise, the peer is considered external to the local BGP
speaker's AS.
•
The BGP peer is restarted after issuing this command.
Examples
-> ipv6 bgp neighbor 2001::1 remote-as 100
Release History
Release 6.1.5; command was introduced.
Related Commands
ip bgp autonomous-system
MIB Objects
alaBgpPeer6Table
alaBgpPeer6Addr
alaBgpPeer6AS
OmniSwitch CLI Reference Guide
The 128-bit IPv6 address of the BGP peer.
Autonomous system number in the range 1–65535.
default
1
ipv6 bgp neighbor command cannot be enabled until it is assigned an
ip bgp autonomous-system
Sets the AS for the local BGP speaker.
June 2012
command), the peer is considered inter-
page 25-225