DVMRP Commands
ip dvmrp flash-interval
Configures the minimum flash update interval value. The flash update interval defines how often routing
table change messages are sent to neighboring DVMRP routers.
ip dvmrp flash-interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
Because routing table change messages are sent between the transmission of complete routing tables, the
flash update interval value must be lower than the route report interval.
Examples
-> ip dvmrp flash-interval 5
Release History
Release 6.1; command was introduced.
Related Commands
show ip dvmrp
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpFlashUpdateInterval
OmniSwitch CLI Reference Guide
Specifies the interval value, in seconds (5–86400).
default
5
Displays global DVMRP parameters.
June 2012
page 29-5