Ip Isis Hello-Auth - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip isis hello-auth

Enables or disables the authentication of Hello PDUs globally.
ip isis hello-auth
no ip isis hello-auth
Syntax Definitions
N/A
Defaults
Authentication check of Hello PDUs is enabled by default.
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
Use the no form of this command to prevent the authentication of Hello packets.
Examples
-> ip isis hello-auth
-> no ip isis hello-auth
Release History
Release 6.2.1; command was introduced.
Related Commands
ip isis level hello-auth
show ip isis status
MIB Objects
vRtrIsisTable
vRtrIsisHelloAuthentication
page 24-12
Enables or disables the authentication of Hello PDUs for specific
IS-IS levels.
Displays the IS-IS status.
OmniSwitch CLI Reference Guide
IS-IS Commands
June 2012