Show Ipv6 Bgp Neighbors Policy - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

show ipv6 bgp neighbors policy

Displays the incoming and outgoing prefix6 list policy identifiers configured for BGP IPv6 peer.
show ipv6 bgp neighbors policy ipv6_address
Syntax Definitions
ipv6_address
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
This command displays all of the configured policies for the router, or the polices configured for a specific
BGP IPv6 peer.
Examples
OS6850::> show ipv6 bgp neighbors policy
Neighbor address
Neighbor autonomous system
Neighbor output policy map name
Neighbor input policy map name
Neighbor output aspath-list name
Neighbor input aspath-list name
Neighbor output prefix-list name
Neighbor input prefix-list name
Neighbor output community-list name = <none>,
Neighbor input community-list name
Neighbor soft reconfiguration
Neighbor output prefix6-list name
Neighbor input prefix6-list name
output definitions
Neighbor autonomous system
Neighbor output policy map
name
Neighbor input policy map
name
Neighbor output aspath-list
name
Neighbor input aspath-list
name
OmniSwitch CLI Reference Guide
The 128-bit IPv6 address.
= 2001::1,
The AS to which the peer is assigned. This can be assigned by using
the ip bgp neighbor remote-as
The outbound route map policy for the peer. This can be assigned by
using the ip bgp neighbor route-map
The inbound route map policy for the peer. This can be assigned by
using the ip bgp neighbor route-map
The outbound AS path list policy for the peer. This can be assigned by
using the ip bgp neighbor in-prefix6list
The inbound AS path list policy for the peer. This can be assigned by
using the ip bgp neighbor in-aspathlist
June 2012
= 1,
= <none>,
= <none>,
= <none>,
= <none>,
= <none>,
= <none>,
= <none>,
= enabled
= <none>,
= <none>
command.
command.
command.
command.
command.
page 25-247