IS-IS Commands
ip isis interface status
Enables or disables IS-IS on an interface.
ip isis interface interface_name status {enable | disable}
Syntax Definitions
interface_name
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
When the status is manually disabled, the configuration settings and related statistics of the protocol
remain unaffected.
Examples
-> ip isis interface vlan-101 status enable
-> ip isis interface vlan-101 status disable
Release History
Release 6.2.1; command was introduced.
Related Commands
show ip isis interface
MIB Objects
isisCircTable
isisCircAdminState
OmniSwitch CLI Reference Guide
Name of the interface.
Administratively enables IS-IS on the interface.
Administratively disables IS-IS on the interface.
default
disable
Displays the IS-IS interface information.
June 2012
page 24-61