Ip Dvmrp Report-Interval - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

DVMRP Commands

ip dvmrp report-interval

Configures the route report interval. This value defines how often the switch will send its complete rout-
ing table to neighboring routers running DVMRP.
ip dvmrp report-interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> ip dvmrp report-interval 60
Release History
Release 6.1; command was introduced.
Related Commands
show ip dvmrp route
show ip dvmrp
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpRouteReportInterval
OmniSwitch CLI Reference Guide
Specifies the report interval, in seconds (10–2000).
default
60
Displays the DVMRP routes that are being advertised to other rout-
ers.
Displays the global DVMRP parameters.
June 2012 page 29-13