Ip Bgp Neighbor Description - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp neighbor description

Configures the BGP peer name.
ip bgp neighbor ip_address description string
Syntax Definitions
ip_address
string
Defaults
parameter
string
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
The peer name is a text identifier that, by default, follows the format "peer(x.x.x.x)" where x.x.x.x is
the IP address of the BGP peer. For example, the default name of a peer at address 198.216.14.23
would be "peer(198.216.14.23)".
•
A peer name with embedded spaces must be enclosed in quotation marks.
Examples
-> ip bgp neighbor 172.22.2.115 description "peer for building 3"
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp neighbor
MIB Objects
alaBgpPeerTable
alaBgpPeerAddr
alaBgpPeerName
OmniSwitch CLI Reference Guide
32-bit IP address of the BGP peer.
Peer name (1 - 20 characters).
default
peer(ip_address)
Sets the IP address for the peer.
June 2012 page 25-73