Show Ipv6 Ospf Neighbor - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ipv6 ospf neighbor

Displays information on OSPFv3 non-virtual neighbors.
show ipv6 ospf neighbor [router ipv4_address][interface interface_name]
Syntax Definitions
ipv4_address
interface_name
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command is used to display all non-virtual neighbors of the OSPF router.
•
See the Related Commands section below to modify the list.
Examples
-> show ipv6 ospf neighbor
Router ID
----------------+--------------------+-----+----------------------------------
1.1.1.1
3.3.3.3
5.5.5.5
23.23.23.23
23.23.23.23
24.24.24.24
24.24.24.24
output definitions
Router ID
Area/Transit Area
State
Interface
-> show ipv6 ospf neighbor router 24.24.24.24
Router ID
----------------+--------------------+-----+--------------
24.24.24.24
24.24.24.24
page 23-34
A 32-bit router ID of the neighboring router.
The name of the interface.
Area/Transit Area
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.1
0.0.0.1
0.0.0.1
0.0.0.1
The unique identification for the router.
The area identifier.
The state of the OSPF neighbor adjacency.
The name of the interface.
Area/Transit Area
0.0.0.1
0.0.0.1
State Interface
FULL vlan-2071
FULL vlan-2071
FULL vlan-2071
FULL vlan-2055
FULL vlan-2056
FULL vlan-2065
FULL vlan-2066
State Interface
FULL vlan-2070
FULL vlan-2073
OmniSwitch CLI Reference Guide
OSPFv3 Commands
June 2012