Qos Flush - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Alcatel-lucent omniswitch 6850-48: reference guide

Hide thumbs Also See for OmniSwitch 6850-48:

Table of Contents

QoS Commands

qos flush

Deletes all pending policy information. This command is different from qos revert, which returns the

pending policy configuration to its last applied settings.

Syntax Definitions

Platforms Supported

OmniSwitch 6400, 6850, 6850E, 6855, 9000E

Usage Guidelines

If you enter this command, the pending policy configuration is completely erased. If you then enter qos

apply, the erased configuration overwrites the applied policies and you will erase all of your policy

configuration.

Note. Do not use this command unless you want to erase all of your policy configuration and start config-

uring new policies.

Use the qos revert command to return the pending policy configuration to its last applied value.

Policy configuration includes the following commands:

base commands

policy network group

policy service

policy service group

-> qos flush

Release History

Release 6.1; command was introduced.

OmniSwitch CLI Reference Guide

policy mac group

policy port group

policy condition

policy action