Ip Dvmrp Debug-Level - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip dvmrp debug-level

Defines the level of debugging for DVMRP protocol on the switch.
ip dvmrp debug-level level
Syntax Definitions
level
Defaults
parameter
level
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
When the debug level is set to 0, DVMRP debug logging is turned off.
Examples
-> ip dvmrp debug-level 2
Release History
Release 6.1; command was introduced.
Related Commands
ip dvmrp debug-type
show ip dvmrp debug
MIB Objects
N/A
page 29-22
Specifies the DVMRP debug level (0–255). Higher debug-levels will
include all messages that correspond to a lower value. For example, a
debug level of 2 will display all messages for level 1 and level 2. As a
rule of thumb, higher levels will display more detailed messages; lower
levels will display more basic messages.
default
1
Enables or disables DVMRP debugging for a specified message
type, or for all message types.
Displays the current level of debugging for DVMRP protocol on the
switch, as well as the current status for all debugging types.
OmniSwitch CLI Reference Guide
DVMRP Commands
June 2012