Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1765

Server Load Balancing Commands
•
A maximum of 16 Server Load Balancing clusters may be configured on an OmniSwitch 6850/6850E
switch. Each cluster may contain up to 16 servers for a total of 256 servers per switch.
Examples
-> ip slb cluster corporate_servers vip 1.2.3.4
-> ip slb cluster "mail servers" vip 1.2.3.6
-> ip slb cluster cluster_1 condition intranet_cond l2
-> ip slb cluster cluster_2 condition slb_cond l3
-> no ip slb cluster hr_servers
Release History
Release 6.1; command was introduced.
Release 6.1.3; condition, l2, l3, and arp parameters added.
Release 6.1.5; l2 and l3 parameters not used with the vip parameter; arp parameter deprecated.
Related Commands
show ip slb clusters
show ip slb cluster
ip slb admin
ip slb server ip cluster
MIB Objects
slbClusterTable
slbClusterName
slbClusterVIP
slbClusterRowStatus
slbClusterPackets
slbClusterCondition
slbClusterType
OmniSwitch CLI Reference Guide
Displays the status and configuration of all Server Load Balancing clus-
ters on a switch.
Displays detailed status and configuration information for a single
Server Load Balancing cluster on a switch.
Enables or disables Server Load Balancing on a switch.
Adds, deletes, or modifies parameters of physical servers in logical
Server Load Balancing clusters.
June 2012 page 26-5