Show Ip Bgp Path - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip bgp path

Displays BGP paths.
show ip bgp path
[ip_addr ip_address ip_mask]
[peer_addr peer_address]
[aspath-list aspathlist_name]
[community-list community_list_name]
[prefix-list prefix_name]
[route-map routemap_name]
[cidr-only]
[community community_number]
[neighbor_recv recv_peer_address]
[neighbor_adv adv_peer_addr]
[regexp "regular_expression"]
[best]
Syntax Definitions
ip_address
ip_mask
peer_address
aspathlist_name
community_list_name
prefix_name
routemap_name
cidr-only
community_number
recv_peer_address
adv_peer_addr
regular_expression
best
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
page 25-158
A 32-bit IP address of the path.
A 32-bit subnet mask of the path.
A 32-bit IP address of the path on which to filter.
AS path on which to filter.
Community name on which to filter.
Prefix on which to filter.
Route map on which to filter.
Filter out everything except CIDR routes.
Community number on which to filter.
Filter all except paths received from this path.
Filter all except paths sent to this path.
Regular expression on which to filter. Regular expressions must be
enclosed by quotes. For example, "$100".
Show only the best path.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012