Ip Dvmrp Tunnel Ttl - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip dvmrp tunnel ttl

Configures the TTL value for the tunnel defined for the specified local address and remote address. The
TTL value is added to the TTL field of the IP header for outgoing packets destined for the remote tunnel
endpoint.
ip dvmrp tunnel {interface_name remote_address} ttl value
Syntax Definitions
interface_name
remote_address
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
The local IP address for the tunnel must match the IP address of an existing DVMRP tunnel.
•
A value of 0 indicates that the value is copied from the payload's header.
Examples
-> ip dvmrp tunnel vlan-2 172.22.2.120 ttl 0
Release History
Release 6.1; command was introduced.
Release 6.1.1; local_address deprecated.
Related Commands
ip dvmrp tunnel
show ip dvmrp tunnel
page 29-20
The name of the interface.
Remote IP address of the tunnel.
The Time to Live (TTL) value (0–255).
default
255
Adds or deletes a DVMRP tunnel for the specified local and remote
addresses.
Displays the DVMRP tunnel entries.
OmniSwitch CLI Reference Guide
DVMRP Commands
June 2012