Show Ipv6 Multicast - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ipv6 multicast

Displays the IPv6 Multicast Switching and Routing status and the general configuration parameters on the
specified VLAN or on the system if no VLAN is specified.
show ipv6 multicast [vlan vid]
Syntax Definitions
vid
Defaults
By default the status and general configuration parameters for the system.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
Specify a VLAN ID to display the configuration information for an individual VLAN.
Examples
-> show ipv6 multicast vlan 100
Status:
Querying:
Proxying:
Spoofing:
Zapping:
Querier Forwarding:
Version:
Robustness:
Query Interval (seconds):
Query Response Interval (milliseconds):
Last Member Query Interval (milliseconds):
Unsolicited Report Interval (seconds)
Router Timeout (seconds):
Source Timeout (seconds):
Max-group
Max-group action
page 27-104
VLAN for which to display the configuration.
IP Multicast Switching Commands
= Enabled
= Disabled
= Disabled
= Disabled
= Disabled
= Disabled
= 1
= 2
= 125
= 10000
= 1000
= 1,
= 90
= 30
= 5,
= drop
OmniSwitch CLI Reference Guide June 2012