Ip Bgp Policy Route-Map Asprepend - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp policy route-map asprepend

Configures the AS path prepend action to be taken when a match is found.
ip bgp policy route-map name sequence_number asprepend path
Syntax Definitions
name
sequence_number
path
Defaults
parameter
path
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
By default, no AS path is prepended. This command allows AS path numbers to be prepended (added to
the beginning of the AS path list) to the AS path attribute of a matching route. The default behavior can be
reset by changing the value to "none".
Examples
-> ip bgp policy route-map routemap1 1 asprepend "700 800 900"
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp policy prefix6-list
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapAsPrepend
OmniSwitch CLI Reference Guide
The route map name.
The route map sequence number. The valid range is 1–255.
The AS path to prepend or "none". Note that multiple AS path entries
must be enclosed in quotes (e.g., "500 600 700").
default
none
Creates or deletes a policy route map.
June 2012 page 25-125