Ipv6 Ospf Interface Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ipv6 ospf interface status

Enables or disables the administration status on an OSPFv3 interface.
ipv6 ospf interface interface_name status {enable | disable}
no ipv6 ospf interface interface_name
Syntax Definitions
interface_name
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of the command to delete an OSPFv3 interface.
•
The OSPFv3 interface must be enabled to participate in the OSPFv3 protocol.
Examples
-> ipv6 ospf interface vlan-101 status enable
-> ipv6 ospf interface vlan-101 status disable
-> no ipv6 ospf interface vlan-101
-> no ipv6 ospf interface vlan-101
Release History
Release 6.1.3; command was introduced.
Related Commands
show ipv6 ospf interface
MIB Objects
ospfv3IfTable
ospfv3IfIndex
ospfv3IfAdminStat
page 23-16
The name of the interface.
Enables the OSPFv3 interface.
Disables the OSPFv3 interface.
default
enable
Displays the status and statistics of an OSPFv3 interface.
OmniSwitch CLI Reference Guide
OSPFv3 Commands
June 2012