Ip Bgp Maximum-Paths - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp maximum-paths

Enables or disables support for multiple equal paths. When multipath support is enabled and the path
selection process determines that multiple paths are equal when the router-id is disregarded, then all equal
paths are installed in the hardware forwarding table. When multipath support is disabled, only the best
route entry is installed in the hardware forwarding table.
ip bgp maximum-paths
no ip bgp maximum-paths
Syntax Definitions
N/A
Defaults
This command is disabled by default.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to disable support for multiple equal cost paths.
•
The BGP protocol must be disabled (using the
Examples
-> ip bgp maximum-paths
-> no ip bgp maximum-paths
Release History
Release 6.1; command was introduced.
Related Commands
show ip bgp
MIB Objects
alaBgpGlobal
alaBgpMultiPath
OmniSwitch CLI Reference Guide
ip bgp status
Displays the current global settings for the local BGP speaker.
June 2012
command) before using this command.
page 25-25