Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2105

PIM Commands
output definitions
Scope
BSR Address
BSR Priority
Hash Mask Length
Expiry Time
Release History
Release 6.3.1; command was introduced.
Release 6.3.4; scope parameter was added.
Related Commands
ipv6 pim cbsr
MIB Objects
pimBsrElectedBSRTable
pimBsrElectedBSRZoneIndex
pimBsrElectedBSRAddress
pimBsrElectedBSRPriority
pimBsrElectedBSRHashMaskLength
pimBsrElectedBSRExpiryTime
OmniSwitch CLI Reference Guide
IPv6 scope value that ranges from 3-15. It is used to define BSR infor-
mation associated with a particular scope zone.
The IPv6 unicast address of the elected BSR.
The priority value of the elected BSR. The higher the value, the higher
the priority.
The hash mask length that is advertised in the Bootstrap messages by
the elected BSR (the length of the mask is used in the hash function
when computing the Rendezvous Point (RP) for a multicast group.
The minimum time remaining before the elected BSR for PIM IPv6
will be declared down.
Configures the Candidate-BSR information that is used in the Boot-
strap messages.
June 2012 page 30-117