Show Ipmvlan Port-Config - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

IP Multicast VLAN Commands

show ipmvlan port-config

Displays the sender and receiver IPMVLANs for a specific slot or port.
show vlan ipmvlan port-config [slot/port | agg_num]
Syntax Definitions
slot/port
agg_num
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> show vlan ipmvlan port-config 2/1
ipmvlan type
+---------+------------+
50 receiver
-> show vlan ipmvlan port-config 2/2
ipmvlan type
+---------+------------+
51 receiver
100 receiver
-> show vlan ipmvlan port-config 1
ipmvlan type
+---------+------------+
101 sender
output definitions
ipmvlan
type
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; command was modified.
OmniSwitch CLI Reference Guide
The slot number for the module and physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The Link aggregate ID number. The valid range is 0–31.
The numerical IPMVLAN ID.
The type (sender or receiver) of the IPMVLAN port.
June 2012 page 28-17