Show Ip Bgp Policy Community-List - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip bgp policy community-list

Displays community list parameters.
show ip bgp policy community-list [name] [string]
Syntax Definitions
name
string
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
This command displays a list of the community policies for the speaker, or a specific policy defined by its
name or community match string.
Examples
-> show ip bgp policy community-list
Community list name
-------------------------+--------------------------------------------------
adfasdf
-> show ip bgp policy community-list coml1
Community List name = coml1
Community string
Admin state
Match type
Priority
Action
Primary index
output definitions
Community List name
Community string
Admin state
Match type
page 25-184
Community name.
Community match list string
Community string
0:0
= 600:1
= disabled,
= exact,
= 1,
= deny,
= 0
The community list name. This is defined using the
community-list
The community list definition. This is defined using the
community-list
The administration state of the community list policy, either enabled or
disabled.
The match type of the community list. This is defined using the
policy community-list match-type
command.
command.
command.
OmniSwitch CLI Reference Guide
BGP Commands
ip bgp policy
ip bgp policy
ip bgp
June 2012