IP Multicast Switching Commands
show ip multicast
Displays the IP Multicast Switching and Routing status and the general configuration parameters on the
specified VLAN or on the system if no VLAN is specified.
show ip multicast [vlan vid]
Syntax Definitions
vid
Defaults
By default the status and general configuration parameters for the system.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
Specify a VLAN ID to display the configuration information for an individual VLAN.
Examples
-> show ip multicast
Status:
Querying:
Proxying
Spoofing:
Zapping:
Querier Forwarding:
Version:
Robustness:
Query Interval (seconds):
Query Response Interval (tenths of seconds):
Last Member Query Interval(tenths of seconds):10
Unsolicited Report Interval(seconds):
Router Timeout (seconds):
Source Timeout (seconds):
Max-group:
Max-group action:
Helper-address
Lookup Mode
OmniSwitch CLI Reference Guide
VLAN ID number (1–4094).
June 2012
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
2
2
125
100
1
90
30
10,
replace
10.1.1.198
source-group
page 27-85