Ip Bgp Graceful-Restart - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp graceful-restart

Configures support for the graceful restart feature on a BGP router.
ip bgp graceful-restart
no ip bgp graceful-restart
Syntax Definitions
N/A
Defaults
Graceful restart is enabled by default.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to disable support for the graceful restart feature on a BGP router. It
has only unplanned graceful restart.
•
The minimum hardware configuration for this command is a redundant CMM configuration. This
command is not supported on a chassis with a single CMM or on an in a standalone switch.
•
On an OmniSwitch stackable switch graceful restart is supported only on active ports (i.e., interfaces)
that are on the secondary or idle modules in a stack during a takeover. It is not supported on ports on a
primary element in a stack.
•
Note that graceful restart does not support IPv6 prefixes at this time.
Examples
-> ip bgp graceful restart
-> no ip bgp graceful restart
Release History
Release 6.1.3; command was introduced.
Related Commands
show ip bgp
MIB Objects
alaBgpGlobal
alaBgpGracefulRestart
alaBgpRestartInterval
OmniSwitch CLI Reference Guide
Displays the current global settings for the local BGP speaker.
June 2012 page 25-193