Show Qos Port - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show qos port

Displays information about all QoS ports or a particular port.
show qos port [slot/port] [statistics]
Syntax Definitions
slot/port
statistics
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information for all ports is displayed unless a particular port is specified.
•
Use the qos port command to configure port parameters.
•
For ports that are trusted (Yes displays in the Trust field), the Trust field includes one of the following
characters:
character definition
+ Indicates that the port is manually configured as trusted through the
port trusted
trust setting configured through the
* Indicates that the port is automatically trusted regardless of the global set-
ting set through the
ports configured for 802.1Q.)
Examples
-> show qos port
Slot/
Port Active Trust P/DSCP Classification Deflt Total Physical Ingress Egress Map/Mark Type
-----+-----+-----+------+--------------+-----+-----+--------+-------+------+--------+--------
1/1 Yes No
1/2 No No
1/3 No No
1/4 No No
1/5 No No
1/6 No No
1/7 No No
1/8 No No
1/9 No No
1/10 No No
1/11 No No
1/12 No No
page 32-66
The physical slot and port number. For example: 3/1.
Displays statistics for high-density gigabit modules.
command; the port setting takes precedence over the global
qos trust ports
Default Default
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
qos trust ports command.
command. (Applies to mobile ports and
Queues Bandwidth
8 0 100M
8 0 0K
8 0 0K
8 0 0K
8 0 0K
8 0 0K
8 0 0K
8 0 0K
8 0 0K
8 0 0K
8 0 0K
8 0 0K
OmniSwitch CLI Reference Guide
QoS Commands
qos
DEI
- - No /Yes ethernet
- - No /No ethernet
- - No /No ethernet
- - No /No ethernet
- - No /No ethernet
- - No /No ethernet
- - No /No ethernet
- - No /No ethernet
- - No /No ethernet
- - Yes /Yes ethernet
- - No /No ethernet
- - No /No ethernet
June 2012