ip isis interface default-type
Sets the interface type to default.
ip isis interface interface_name default-type
Syntax Definitions
interface_name
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
This command is used to indicate whether the circuit type is default or has been modified.
Examples
-> ip isis interface lan-3 default-type
Release History
Release 6.2.1; command was introduced.
Related Commands
ip isis interface interface-type
MIB Objects
vRtrIsisIfTable
vRtrIsisIfTypeDefault
page 24-70
The IP interface name.
Configures the IS-IS interface as broadcast or point-to-point.
OmniSwitch CLI Reference Guide
IS-IS Commands
June 2012