Ipv6 Bgp Neighbor Soft-Reconfiguration - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ipv6 bgp neighbor soft-reconfiguration

Enables or disables IPv6 BGP peer soft reconfiguration. Soft reconfiguration increases the stability of the
peer by allowing you to reconfigure attributes that require peer resets without halting the TCP connection
with other peers.
ipv6 bgp neighbor peer6_address soft-reconfiguration
no ipv6 bgp neighbor peer6_address soft-reconfiguration
Syntax Definitions
peer6_address
Default
This command is enabled by default.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to disable this feature.
•
This feature stores routes and other configuration information in local memory. When you make
configuration changes that require a peer reset, the routing cache is not cleared and connections with
other peers are not interrupted.
•
BGP neighbor must be configured.
•
BGP peer is restarted after issuing this command.
Examples
-> ipv6 bgp neighbor 2021::10 soft-reconfiguration
-> no ipv6 bgp neighbor 2021::10 soft-reconfiguration
Release History
Release 6.3.4; command was introduced
page 25-218
The 128-bit IPv6 address of the BGP peer.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012