Show Ipv6 Pim Dense Group - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ipv6 pim dense group

Displays the static configuration of IPv6 multicast group mappings for PIM Dense Mode (DM).
show ipv6 pim dense group
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
If the group prefixes configured for two or more rows in this table overlap, the row with the greatest prefix
length value is used for the overlapping range.
Examples
-> show ipv6 pim dense group
Group Address/Pref Length
---------------------------+-----+--------+----------+--------
ff00::/8
ff34::/32
output definitions
Group Address/Pref Length
Mode
Override
Precedence
Status
Release History
Release 6.3.1; command was introduced.
page 30-98
Mode Override Precedence Status
dm false none
dm false none
The IPv6 multicast group address along with the prefix length.
The IPv6 PIM mode that is used for the groups in this prefix.
Specifies this static RP configuration to override the dynamically
learned RP information for the specified group(s).
The precedence value that can be used for this static RP configuration.
Displays whether this entry is currently enabled or disabled. Options
include enabled and disabled.
enabled
enabled
OmniSwitch CLI Reference Guide
PIM Commands
June 2012