Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2229

QoS Policy Commands
•
If traps are enabled for the rule, a trap is only sent when a port disable action or UserPort shutdown
operation is triggered.
•
The default-list option adds the rule to the default policy list. Rules are added to this list by default
when the rule is created. A rule can belong to multiple policy lists. As a result, the rule remains a
member of the default list even when it is subsequently assigned to additional lists.
•
Note that each time a rule is assigned to a policy list, an instance of that rule is created and each
instance is allocated system resources. Use the no default-list option with this command to exclude the
rule from the default policy list.
•
If the configuration snapshot command is entered after the policy rule command is configured, the
resulting ASCII file will include the following additional syntax for the policy rule command:
from {cli | ldap | blt}
This syntax indicates how the rule was created. The cli and ldap options may be changed by a user
modifying the ASCII file; however, changing this setting is not recommended. The blt option indi-
cates a built-in rule, this setting is not configurable.
Examples
-> policy rule rule2 condition c2 action a2
-> policy rule rule2 precedence 65535
-> policy rule rule2 validity period vp01
-> no policy rule rule2
-> policy rule rule2 no precedence
-> policy rule rule2 no validity period
-> policy rule rule2 no default-list
Release History
Release 6.1; command was introduced.
Release 6.1.1; count parameter added.
Release 6.3.4; default-list parameter added.
Related Commands
policy validity period
policy condition
policy action
policy list
qos apply
show active policy rule
show policy rule
OmniSwitch CLI Reference Guide
Configures a validity period that specifies days, times, and/or months
during which an associated policy rule is in effect.
Configures condition parameters.
Configures action parameters.
Adds or removes a policy rule from a policy list.
Applies configured QoS and policy settings to the current configuration.
Displays only those policy rules that are currently being enforced on the
switch.
Displays information for policy rules configured on the switch.
June 2012 page 33-9