Show Ipv6 Multicast Port - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

IP Multicast Switching Commands

show ipv6 multicast port

Display the max-group configuration applicable for all port or vlan instances of a given port or all ports.
The current number of groups learnt on a given port or vlan instance will also be displayed in this show
output..
show ipv6 multicast port [slot/port]
Syntax Definitions
slot | port
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
Specify a VLAN ID to display the configuration information for an individual VLAN.
Examples
-> show ipv6 multicast port 1/6
Max-group 9 Action replace
Total 1 Port-Vlan Pairs
Port VLAN Current Mld
-------+-----+-------------+----------+---------
1/6 15
Output fields are described here:
output definitions
Port
VLAN
Current Groups
IGMP
Max-group
Action
Release History
Release 6.3.4; command was introduced.
OmniSwitch CLI Reference Guide
The slot number for the module and the physical port number on that
module (e.g. 3/1 specifies port 1 on slot 3)).
Max-group
Groups
5
The slot and port number of the IP multicast port.
The VLAN associated with the IP multicast port.
The current group associated with the IP Current groups.
The IGMP associated with the IP multicast port.
The maximum group count allowed on the port.
The action to be taken when the group membership limit is exceeded.
June 2012
Action
0 none
page 27-109