Show Ip Bgp Neighbors Timer - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

show ip bgp neighbors timer

Displays BGP peer timer statistics.
show ip bgp neighbors timer [ip_address]
Syntax Definitions
ip_address
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
This command displays the timer values for all peer associated with this speaker, or for a specific peer.
Examples
-> show ip bgp neighbors timer
Legends: Nbr
As
RtAdv
Kalive
Ka(C)
Nbr address As
---------------+-----+-----+-------+-----+-----+------+-----
192.40.4.29
192.40.4.121
output definitions
Nbr address
As
Hold
Hold(C)
RtAdv
Retry
OmniSwitch CLI Reference Guide
A 32-bit IP address.
= Neighbor
= Autonomous System
= Route Advertisement
= Keep Alive (actual)
= Configured Keep Alive
Hold Hold(C) RtAdv Retry Kalive Ka(C)
3 90 90
5 0 90
The IP address for this BGP peer. Assign this address through the
bgp neighbor
The autonomous system to which this peer belongs. A peer's AS num-
ber is assigned through the
The current count for the holdtime value.
The holdtime value configured through the
command.
The route advertisement interval, in seconds, for updates between
external BGP peers. This value is configured through the
neighbor advertisement-interval
The interval, in seconds, between retries by this peer to set up a con-
nection via TCP with another peer. This value is configured through
the ip bgp neighbor timers
June 2012
30 120 30 30
30 120 0 30
command.
ip bgp neighbor remote-as
command.
command.
ip bgp neighbor timers
ip bgp
command.
page 25-175
ip