Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1983

DVMRP Commands
output definitions (continued)
Expires
Flags
Release History
Release 6.1; command was introduced.
Related Commands
ip dvmrp report-interval
ip dvmrp route-holddown
ip dvmrp route-timeout
MIB Objects
dvmrpRouteTable
dvmrpRouteSource
dvmrpRouteSourceMask
dvmrpRouteMetric
dvmrpRouteExpiryTime
dvmrpRouteUpTime
OmniSwitch CLI Reference Guide
The expiration time for the corresponding route. Because it is not appli-
cable, no expiration time is displayed for local routes.
The flag type of a particular DVMRP route. Options include L (Local),
R (Remote), F (Flash), H (Holddown), and I (Invalid).
Configures the route report interval.
Configures the time during which DVMRP routes are kept in a hold
down state.
Configures the route expiration timeout value.
June 2012 page 29-37