Qos Revert - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

qos revert

Deletes any QoS configuration that has not been applied to the configuration through the qos apply
command.
qos revert
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Use this command to remove currently configured policies that have not yet been activated through the
qos apply command.
Examples
-> qos revert
Release History
Release 6.1; command was introduced.
Related Commands
policy rule
qos apply
qos reset
MIB Objects
alaQoSConfigTable
alaQoSConfigRevert
page 32-38
Configures a policy rule and saves it to the current configuration but
does not make it active on the switch.
Applies all QoS settings configured on the switch to the current configu-
ration.
Resets the QoS configuration to its defaults.
OmniSwitch CLI Reference Guide
QoS Commands
June 2012