Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1487

IS-IS Commands
•
By default, the authentication is disabled and no authentication type is configured.
Examples
-> ip isis interface vlan-101 hello-auth-type md5 encrypt-key 7a1e441a014b4030
-> ip isis interface vlan-101 hello-auth-type none
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; key and encrypt-key parameters were added.
Related Commands
ip isis interface level hello-
auth-type
show ip isis interface
MIB Objects
vRtrIsisIfTable
vRtrIsisIfHelloAuthType
vRtrIsisIfHelloAuthKey
OmniSwitch CLI Reference Guide
Configures the authentication of Hello PDUs for the specified IS-IS
level of an interface.
Displays the IS-IS interface information.
June 2012 page 24-65