Ip Bgp Neighbor In-Prefixlist - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp neighbor in-prefixlist

Assigns an inbound prefix filter list to a BGP peer.
ip bgp neighbor ip_address in-prefixlist {string | none}
Syntax Definitions
ip_address
string
none
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
The prefix list name (InboundPrefix in the example below) is created using the
list command. Any inbound routes from the BGP peer must match this prefix filter before being
accepted or passed to inbound policy.
•
To deassign an input prefix filter list, use this command to assign a value of "none."
Examples
-> ip bgp neighbor 172.22.2.115 in-prefixlist InboundPrefix
-> ip bgp neighbor 172.22.2.115 in-prefixlist none
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp policy prefix-list
MIB Objects
alaBgpPeerTable
alaBgpPeerPrefixListIn
page 25-88
32-bit IP address.
Input prefix filter list (0 to 70 characters). This name is case sensitive.
Removes the prefix list from the peer.
Creates or deletes a prefix match list.
ip bgp policy prefix-
OmniSwitch CLI Reference Guide
BGP Commands
June 2012