Ip Bgp Neighbor Remote-As - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp neighbor remote-as

Assigns an AS number to this BGP peer.
ip bgp neighbor ip_address remote-as value
Syntax Definitions
ip_address
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
A BGP peer created with the
enable) until it is assigned an autonomous system number. If the AS number matches the AS number
assigned to the local BGP speaker (assigned using the
is considered internal to the local autonomous system. Otherwise, the peer is consider external to the
local BGP speaker's AS.
•
This BGP peer may not be operational within this router and it may be in an external AS, but it must
still be configured on this router before the local BGP speaker can establish a connection to the peer.
The local BGP speaker does not auto-discover peers in other routers; it initially learns about peers
through the peer commands.
•
The BGP peer is restarted after issuing this command.
Examples
-> ip bgp neighbor 172.22.2.115 remote-as 100
Release History
Release 6.1; command was introduced.
OmniSwitch CLI Reference Guide
32-bit IP address of the BGP peer.
Autonomous system number in the range 1 - 65535.
default
1
ip bgp neighbor command cannot be enabled
June 2012
(ip bgp neighbor status
ip bgp autonomous-system command), the peer
page 25-77