Ip Bgp Policy Community-List Priority - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp policy community-list priority

Configures the priority for processing multiple items in a community list filter.
ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:num}
priority value
Syntax Definitions
name
none
no-export
no-advertise
no-export-subconfed
num:num
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
The higher the priority value specified in the command, the later the matching is processed. For example,
items with a priority of 1 (the default) are processed before items assigned a priority of 3. When items
have an equal priority, the processing order is indeterminate.
Examples
-> ip bgp policy community-list commListB 500:1 priority 3
Release History
Release 6.1; command was introduced.
page 25-110
Community name, e.g., CommListAIn, ranging from 0 to 70 characters,
or a value of none. The Community name is case sensitive.
Removes the community restrictions on the community section of the
route map.
Routes in this community are advertised within the AS but not beyond
the local AS.
Routes in this community are not advertised to any peer.
Routes in this community are not advertised to any external BGP peer.
The community number, given in the form of the AS number and the
community number, separated by a colon, as defined in RFC 1997.
Priority value in the range 0 - 255.
default
1
OmniSwitch CLI Reference Guide
BGP Commands
June 2012